LYNK LITE
Communication Gateway

COMPATIBLE WITH LYNK ACCESS
AVAILABLE NOW
Image

LYNK LITE Communication Gateway aggregates and displays the State of Charge for AES PROFESSIONAL, DLP-E and AES LiFePO4 batteries in a compact package suitable for in-line integration in motive machine battery compartments.

Unlock the full potential of Discover Energy Systems' Lithium batteries by integrating them with inverter-chargers, on and off-board chargers, displays, load centers, motor controls, PLCs, and telematics to optimize machine performance.

Improve system integration using multiple communication interfaces and CAN-based protocols, including RV-C, CANopen, J1939, or serial CAN.

Turn a good machine into a great one with ultra-fast charging, real-time status, predictive equipment control and diagnostics.

Product Features

 
 Status View
  • At-A-Glance State of Charge LED Indicator
  • Communication Status
 Ports
  • LYNK Port - IEC (M12 -5 PIN)
  • CAN OUT - IEC (M12 -5 PIN)
  • USB Device - Type B - Micro
  • Configurable - CANopen, Serial CAN, J1939, RV-C
  • A single LYNK Gateway supports up to 20 parallel batteries
  • State of Charge (SOC), voltage, temperature and battery status are communicated in real-time to on-board devices
  • Charge voltage and current targets, voltage, temperature, current, and battery diagnostics
  • Battery charge settings are automatically programmed for multiple brands of industrial chargers
  • Configurable CANopen
  • Up to 25% faster 0% to 100% SOC charging with dynamic charge management
  • Fast Installation 
  • No special tools
  • Plug-and-play
  • Upload Battery Firmware
  • Download Battery Data logs
  • Available LYNK ACCESS PC Software for Data Analysis and Configuration
  • CE
  • Internal cell balancing is optimized, enabling the highest usable capacity and true 100% depth of discharge over the entire life of the battery

	

		
LYNK ACCESS PC Software
  • Configure LYNK Device
  • Monitor Discover Lithium Batteries
  • Troubleshoot and monitor Discover Lithium batteries
  • Simulate and validate integration of Discover Lithium Batteries
LYNK ACCESS
LYNK NETWORK SUPPORT
LYNK ACCESS DEVELOPER PAGE
Image
	


The LYNK LITE Advantage
Image Overlay
LYNK LITE Communication Gateway
LYNK LITE Communication Gateway aggregates and displays in real-time the State of Charge for AES PROFESSIONAL and AES LiFePO4 batteries. Unlock the full potential of these lithium batteries by integrating them with inverter-chargers, on and off-board chargers, displays, load centers, motor controls, PLCs, and telematics to optimize system performance.
Image
Product Registration
Click on the REGISTER PRODUCT button and use the form to register your product(s) to validate your warranty.

REGISTER PRODUCT
Compatible Product
Image
AES PROFESSIONAL
Image
AES LiFePO4
Accessories
 
Image
Additional Accessories
IP-65 rated network cables suitable for wet and humid environments are available for IP-67 rated LITHIUM PROFESSIONAL.
  • DLP B2B-400 (COMM Cable 0.4 meters / 15.75 inches) | PN: 950-0035
  • DLP TOL-7600 (COMM Cable 7.6 meters / 299.25 inches) | PN: 950-0037
  • DLP TOL-1800 (COMM Cable 1.8 meters / 70.87 inches) | PN: 950-0036
  • DLPT Connector (COMM T Connector) | PN: 950-0041
  • DLP T Connector (COMM T Connector) with DLP B2B-400 (COMM Cable 0.4 meters / 15.75 inches) | PN: 950-0038
Battery Compatibility


Specifications for Developers
  • Serial CAN
  • CANopen
  • RV-C
Available Support for Developers
  • Simulate battery status, faults, and protections for integration testing with other systems*
  • CANopen support documentation*
  • Serial CAN support documentation*
*Available to select partners - Apply for access below.
    LYNK ACCESS DEVELOPER PAGE
    Additional Communication Products
     
    LYNK II
    Advanced Integration - Faster Charging
    Unlock the full potential of AES PROFESSIONAL and AES LiFePO4 Mobile Industrial battery by enabling the BMS to optimize and dynamically manage the charge configurations of the world's best industrial chargers and mobile inverter chargers. The LYNK PORT on each AES PROFESSIONAL and AES LiFePO4 allows for real-time closed-loop communication between multiple batteries and with a charger, or inverter charger, using LYNK II to aggregate and communicate State of Charge.

    LEARN MORE
    Image
    How do I work with Discover Energy Systems?
    Discover sells business to business through its global network of factory warehouses and directly to Original Equipment Manufacturers. Tell us about you and your company, and a member of our sales team will reach our to you shortly.
    Get in Touch
    
			
    

	
    

			
    

    

    
				
	
    


			
    
		
    

		
		
    
		
		
		
					
    
	
    
				
			
    
				
				
				
			
    
		    
	
    
	
    
		
    
			
					
    
		
					
    
				
    

    			
    
		
		
				
    
					
    
							
    
						
							
    
									
    
					
    
				
					
    
	
    
			
    

    
		
		
		
    Login Form